功能及特點:
1、RP60熱熔膠噴膠機膠箱內層表面采用氟龍涂層防止炭化,確保膠質最佳狀態,減少堵塞。
2、獨立泵轉速由交流馬達(變頻調速)數字顯示精確控制膠量輸出。
3、雙層過濾去除染污,防止噴頭堵塞。
4、系統冷啟動延遲裝置,防止泵的損壞。
5、RP60熱熔膠噴膠機具有超高溫保護功能。
熱熔膠性能:
熱熔膠在常溫下呈固體狀,加熱到一定溫度熔融成液體狀,噴涂在被粘物后,經壓合、冷卻,能在幾秒鐘內就完成粘合過程。
熱熔膠為100%的固體成份,不含溶劑,無污染;固化時間快、效率高、成本低、粘力強等特點。
應用范圍:
RP60熱熔膠噴膠機主要適用于過濾器車燈等行業。
技術參數:
儲 存 容 量 |
60kg |
接 噴 頭 數 量 |
1-4條 |
熔 膠 速 度 |
60kg/h |
膠 機 長 度 |
1000 |
最大 出膠量 |
60kg/h |
膠 機 寬 度 |
820 |
功 率 |
12kw |
膠 機 高 度 |
1000 |
控 溫 范 圍 |
50-230℃ |
|
此數據是膠粘度在3000CPS時以EVA膠所測得。 |
RP60 Hot Melt Adhesive Spraying Machine
Main characteristic
1. The surface of glue melting oven is coated with the Teflon antisticking layer, efficacious prevent the hot melt adhesive against carbonization,to insure the adhesive in the beststate and reduce blockage.
2. The gear pump adopts frequency conversion which accurate control adhesive capacity output.
3. Double filter can eliminate impurity to prevent the spray head from blockage.
4. The system with cooling device can prevent the pump from damage.
5. The system with temperature protection function can prevent the device from damage.
Range of application
Model RP130 Hot Melt Adhesive spraying Machine is suitable for Filter ,car lamp and on.
Technical parameters:
Lay incapacity |
60kg |
Quantity of spraying heads |
1-4bars |
Spraying speed |
45kg/h |
length |
1000 |
Max.output of glue |
60kg/h |
width |
820 |
Power |
12kw |
height |
1000 |
Range of temperature control |
50-230℃ |
|
This data is measured by EVA glue with the stickness of 3000CPS |